Once secure release the door.
How to fix a sliding metal closet door track.
Fix it by gently grabbing the bent area with a pair of pliers or vise grips bending it back into place.
Then wipe it with a damp rag.
Because sliding doors don t fold out the way bifold doors do they allow access to only half the width of the opening at a time.
Parts for these doors are readily available at home centers hardware stores or online.
Lubricate the rollers but not the track because lubricant will act as a magnet for dust.
Wiggle the door until the pivot snaps into the hole.
If you have a sliding closet door that glides on a bottom track clean the track with a damp cloth to ensure smooth gliding.
The first thing to check is what type of rail system your sliding closet door uses in order for it to slide.
If your doors hang from a top rail and do not have a track on the floor then you need to either replace or tighten down the floor guides.
See if the screws holding the guides down need tightening to be more secure.
Inspect the rollers and tighten them with a.
Sliding closet doors operate on rollers that are positioned in tracks at the top jamb and floor allowing the doors to bypass each other in the tracks.
If a roller is stuck unscrew and remove it.
A closet door track that s bent inward prevents the door from sliding beyond the bend.
Take one of the doors down by lifting it and angling the bottom toward you until the rollers clear the top track then pulling it toward you.
Step 1 remove sliding door.
Then hold the spring loaded top pivot down while you swing the top of the door toward the frame and under the door track.
Direct the part of the door towards you and take out the door from the closet.
Lift your sliding closet door upwards into the top track.
To fix this issue first try vacuuming up debris and grime from the track with a crevice attachment.
Once the door is approximately under the hole in the track release the pivot.
Then retighten the screw close the doors and check the fit.
If grime remains try wiping it up with a mild cleaner and a cloth.
A dirty obstructed or damaged track can make a sliding closet door jump off its track.
Use an aerosol lubricant to lubricate all the door rollers.
When there is a problem with the track of your sliding door you can simply fix it by following a number of simple instructions.
Remove a door by lifting and tilting the bottom out.